It will not burst because of
bleb or hydrosphere.When the
accident happens,the
rheoscope in the ballast
will make the power off so
as to keep us safe.And we
adopt high insulated wire
and design without
electromagnetism,make you
working without any anxiety.
Long life：
The life-span is as long as
3000 hours,much more than
the total hours that the
automobile work at night.
Save electricity：
Only need the electricity of
35W,lightens the power load
system greatly,it saves 40%
on the electricity,improve
vehicle performance
correspondingly,save the
energy.
Exceed the luminance：
The xenon bulb provides as
three times light as halogen
bulb. Therefore,the driver
can see more
higher,wider,farther.So it
is safer to drive a vehicle.
Good colour temperature：
The CT is 4300K-12000K,is
close to the sunlight and
comfortable to our eyes,also
benefit for the safe driving
indirectly.
Easy to install：
Only need to insert the
xenon lamp into the hole of
the original light,fixed the
ballast, connect and have
the cable;And does not need
to change the original part
of vehicle.
HID standard：
1.
Work voltage
It
can work in a wide range of
voltage.Such as in the
voltage between 8V and 18V
direct current,ballast can
work.
2. Protect
function
1．Overloaded
Protect
In order to prevent
burning the bulb and
letting the car
owner find the
vehicle trouble in
time when the
voltage is too high,
when the power
direct current
presses and exceeds
18V,the stable
device quits work
automatically,make
output power not
exceed 45W,protect
the stable device,
prevent HID bulb
from being damaged.
2．Low
voltage Protect
In order to prevent
the bulb from using
up the automobile
battery and then the
automobile being
unable to start
normally.When the
direct current is
under 8V,the ballast
will be out of work
automatically so as
to avoid damaging.
3．Unload
Protected
When the ballast has
not been connected
with the bulb,in
unloaded state,the
ballast will be out
of work
automatically so as
to prevent the
high-tension
electricity from
injuring staff
members.
4．Short
Circuit Protect
Short circuit
protect when the
ballast meets the
unexpected
situation,in the
state of shorting
out,the stable
device quits work
automatically,avoid
damaging.
5．The
transposition
protecting
When the stable
device is in
installation,operate
people fault is it
import power
straight negative
pole to when
connecting inside
out to make,the
stable device quits
work
automatically,guarantee
the stable device is
not damaged.
6、Waterproof,dustproof,quakeproof
performance
3. Start
the performance power
Power input when the
standard voltage
12.8V fast, the
electric current is
not smaller than
surveying and
inviting 8.5A,make
the xenon lamps
connected in
starting one
second,he luminous
flux reaches 20% of
the standard
luminance,in 4
seconds,he luminous
flux reaches 80% of
the standard
luminance.
